Vidar SCSI & RAID Devices Driver Download For Windows


VIDAR p62 36 wide format scanner this was a fully functioning unit when put into storage 4 years ago. Most of this speed increase is in the computer used. This VIDAR truscan is a full featured, high resolution, wide format graphics scanner. Part: 713901 prices Specifications 713901: brand: VIDAR; connectivity: SCSI; type: Pass-Through Scanner. Vidar SIERRA plus film digitizer Pdf User Manuals. View online or download Vidar SIERRA plus film digitizer Installation Manual. Set the Digitizer's SCSI.

RAID Driver is Required for InstallingWindows XP on a SATA Configuration Set to RAID Mode

When the BIOS is set to RAID mode, the RAID driver must be installedbefore you install the OS.


Vidar Scsi & Raid Devices Driver Download For Windows Xp

To Install the RAID Driver

  1. Copy the RAID driver from the Tools and Drivers DVD to a USB floppydrive.

  2. Connect the USB floppy drive to a USB port on the workstation.

    The USB floppy drive must be connected directly to a USB port on theworkstation. Do not connect to a USB hub.

  3. Reboot the workstation and access the BIOS Setup Utility(see To Access the BIOS Setup Utility in Sun Ultra 27 Workstation Service Manual).

  4. Use the Boot menu in the BIOS Setup Utility to verify that theUSB floppy drive is seen by the workstation.

  5. Press the Esc key to exit the BIOS Setup Utility and reboot theworkstation using the Windows XP installation media.

  6. When Press F6 if you need to install a third-partySCSI or RAID driver... appears at the bottom of the Windows Setupscreen, press F6 and follow the instructions to install the RAID driver fromthe USB floppy drive.

  7. Press S to specify an additional device.

    A list appears.

  8. Select the Intel ICH10R RAID SATA controller from the list andproceed with the installation.

Device Drivers for Windows XP 64 Bit & Windows 7, 32 & 64 Bit

For Medical Film Digitizer using Windows XP 64 Bit & Windows 7, 32 & 64 Bit

  • VIDAR only supports USB 2.0 standard on all drivers and USB capable digitizers.
  • VIDAR supports the following Windows operating systems with the VIDAR Driver 6.0
    • Windows XP Professional Service Pack 3 & 64 Bit
    • Windows 7, 32 & 64 Bit

Complete instructions for all supported systems are available in the Setup Guide below:


Vidar Scsi & Raid Devices Driver Download For Windows 10

  • VIDAR Driver 6.0 Setup Guide
  • VIDAR Driver 6.0 Installer File

Two options.

  1. Run (open)
  2. Save
Vidar scsi & raid devices driver download for windows 8.1

Vidar SCSI & RAID Devices Driver Download For Windows

  • From the VIDAR website (www.filmdigitizer.com), VIDAR Driver 6.0, run the .exe file or save the .exe file to your desktop or thumb drive (USB stick).
  • If running the driver program from the website the installation shield will start automatically.
  • If saved to your desktop, double click on the .exe file to begin the install shield program. If you first saved the file to a thumb drive, copy the .exe file to the host PC’s desktop and then double click on the .exe to begin the installation shield program.