12/26/2021»»Sunday

Usb Mass Storage Reader USB Devices Driver Download

12/26/2021

As every USB host controller it has exactly one USB root-hub. The root-hub has two ports, at port 1 there is a USB mass storage device attached which is mounted at drive letter Z. Even the USB drive is USB 2.0 it is running at Full-Speed only because it is attached to a USB 1.1 hub.

For recovering deleted, lost or formatted files (photos, videos, music) from your Android devices with any Photo Recovery software, you must connect your devices with PC in USB mode debugging. However, some Android users don’t know how to do this. Here are some tips to help you connect different version Android devices to PC with USB Mass Storage Mode.

For Android 2.1 to 2.3.7
For Android 4.0 to 4.1.2
For Android 4.2 or newer Android 6,7

  1. Hp Usb Mass Storage Driver free download - USB Mass Storage Controller, HP USB Disk Storage Format Tool, USB Audio ASIO Driver, and many more programs.
  2. Intel® Rapid Storage Technology Driver Installation Software with Intel® Optane™ Memory. The Intel® Rapid Storage Technology (Intel® RST) Floppy Driver (18.0.1.1138) supports the configuration and enabling of system acceleration with Intel® Optane™ memory and maintenance of RAID 0/1/5/10. Driver: Windows 10, 64-bit. Windows Server 2016.
  3. Download usb driver - Best answers Spvd-012.1 usb driver for windows 10 - Forum - Drivers Sony psp usb driver windows 10 - How-To - PSP.
  4. Usb Mass Storage Device Driver free download - USB Mass Storage Controller, Samsung USB Mass Storage Device, USB 2.0 Mass Storage Device, and many more programs.

Click to watch the video tutorial here.

  • How to use USB Mass Storage mode in Android 2.1-2.3.7

If you use Android 2.1-2.3.7 devices like Sony Xperia Samsung Galaxy Note, Samsung Galaxy S/S2,Motorola Droid RAZR, Droid 4, LG Optimus L3, HTC Rezound, HTC Sensation, HTC Desire, Kindle Fire, etc, follow simple instructions to connect your device in the mass storage mode.

1. Turn on USB debugging by click Menu > Setting > Applications > Development > USB debugging

2. Plug the supplied USB cable into your PC and connect it to your device. A USB icon will appear in the status bar when the device has been recognized.

3. In the main screen of your Android device, use your finger to pull down the top status bar. Then touch USB Connected.

4. Touch Connect USB storage.

Then tap “Ok“. When the green Android icon turn orange, the phone is now in USB Mass Storage mode and should now appear as USB disk drives in “Devices with Removable Storage” and be assigned drive letters.

Reader
  • Connect Android 4.0-4.1.2 device in USB mass storage mode

For Android 4.0-4.1.2 devices such as Samsung Galaxy S/S2/S3 or Nexus,HTC Desire X/V/C, HTC One X/V/S,LG Optimus L5/7/9,Optimus G,Motorola Droid RAZR,Sony Xperia V/T, Kindle Fire HD, etc, you can connect them to PC in USB debugging mode with the below guide.

Galaxy S2 (Android 4.0) as example.

1: Open the “Setting” > “More…”

2: Search then Tap on “USB utilities

3: Check the option: “Connect Storage to PC

Then plug the USB cable into the device and connect to your computer. The “USB connected” screen with the large green Android icon will appear. Tap on “Connect USB storage“. A confirmation dialog box will appear. Tap “OK“. The green Android icon will turn orange, indicating that the phone is now in USB Mass Storage mode and should now appear as USB disk drives in “Devices with Removable Storage” and be assigned drive letters.

  • Turn on USB Mass Storage mode in Android 4.2 or later versions Android 6/7/8

You will be dismayed to see that there is no USB Debugging option in Android 4.2 or the latest Android 6, Android 7, Android 8 smartphone or tablets like Nexus 4, Nexus 5X/6P,Google Nexus 10,Samsung Galaxy S8/S7/S4, Galaxy Note 5, Huawei Mate 10/9, Huawei Honor 9, Xiaomi Mi6, Mi 5X, Mi Mix 2, Redmi 5X, Sony Xperia Z5/M5, LG G5, HTC One M9/M8, etc. Here is a way to turn it on since it is very well hidden!

1: Go to Settings -> About Phone/Tablet or Settings -> About Phone -> Software info
2: Go to “Build Number” at the end of the Scroll list.
3: Tap on “Build Number” repeatedly (7 times). On your third tap you should see message indicating that you only have 4 more taps to go to ‘become a developer’. Keep tapping until you are a developer.

Usb Mass Storage Device Drivers

4. Now Developer Option will be included in setting list of yours now. Go to “Develop Options” to check USB debugging > OK. Done.

Tip: When you connect your Android to computer for the first time, you can check “Always allow from this computer” with the pop up before clicking “OK” to finish.


Tip: For some android devices, you also need to select mode “Photos” or “Files” in “Notifications”.

And then you can see your andriod phone icon in PC. “Computer”-”Portable devices” as below.

Notes:
1. After debugging, you connect android device to computer with the factory USB cable at the first time, Windows will look for and install the associated driver automatically. Please waiting a moment for the drive installing, then you can get a pop-up interface and a USB icon will appear in the PC status bar.
2. If your android device doesn’t work as USB debugging mode in PC, try to check and change the USB cable.
Some USB cables only can be used to charge, but can’t to transmit data. So use the factory USB cable or that supports USB data transfers!

After connecting your device to PC with USB Mass Storage mass, or connect the memory card through your computer’s card reader. Then you can recover deleted photos, videos from devices.

Note: If you still can’t connect your Android devices to PC with USB debugging mode with this method, you should search an android USB Drive apps in official site of your phone. For example: Samsung Android USB Driver or install the Android Debug Bridge, etc.

Share and Enjoy


Usb Mass Storage Device Windows 10

USBTrace is an easy to use and powerful USB analyzer (USB traffic sniffer) software. USBTrace can analyze USB protocol at host controllers, hubs and devices. This is a 100% software product. USBTrace supports Windows 2000, XP, 2003/2008 Server, Vista, Windows 7 and Windows 8/8.1 operating systems and works with USB 1.x, 2.0 and 3.0 (low, full, high & super speed) host controllers, hubs and devices.

Reinstall Usb Mass Storage Device Driver

USB 3.0 Support (Super Speed USB). (New)
Analyze USB 3.0 protocol at controllers and devices. Decodes 3.0 standard descriptors and requests.
Supports USB Device Class Decoding.
HID, Hub, Video, Audio, Mass Storage, Bluetooth,
Still Image Capture, Vendor Specific, WUSB HWAPrinter, CDC, Smart Card (CCID), PHDC, TMC
Complete Enumeration Monitoring.
Capture and Analyze all USB requests exchanged during device enumeration. Does not use filter drivers.
Search / Filter / Trigger / Export.
Search captured data. Filter out unwanted data.
Set trigger points. Export captured data.
Background/Continuous capturing.
For high performance/non-stop capture sessions.
Performance Statistics.
Detailed performance analysis for your device/driver.
Supports Windows 8/8.1. (New)
Supports the latest version of Windows. x86/x64 editions of all Microsoft Windows releases supported.

Featured Customers


Key Features and Benefits of our USB protocol Analyzer

USBTrace is an invaluable tool for all those who develop/test firmware and drivers for devices which connect to the PC using the Universal Serial Bus.

Mass Storage Device
Bluetooth
Human Interface Device
Communication Device
Hub Class
Still Image Capture Device
Video
Audio
Vendor Specific
Wireless USB HWA
Printer
Smart Card Reader
PHDC
TMC

Usb Mass Storage Driver Install

  • Easy to use
    USBTrace is an easy-to-use USB protocol analyzer. To analyze a USB device, just select the device and click the 'capture' button. See USBTrace Quick Start Guide.

  • Sniffs USB requests at all levels
    With USBTrace you can analyze USB protocol traffic at USB Host Controllers, USB Hubs and USB devices. The tool captures and displays USB Control, Bulk, Interrupt & Isochronous transfers.

  • Displays detailed device information
    USBTrace decodes and displays both standard and class specific USB descriptors (Device, Hub, Configuration, Interface, Endpoint, Class Specific, IAD, String) and Windows enumeration information.

  • USBTrace does not use any filter drivers
    Unlike other software based USB analyzers, USBTrace does not use any filter driver to capture the USB requests. So USBTrace will not disturb/slow down the PnP system due to its presence.

  • Captures all USB protocol data during device enumeration
    USBTrace is capable of capturing all USB requests exchanged between the host controller/hub and the device during device enumeration. See USB Enumeration Explained to know how USBTrace is different from other USB monitor software.

  • Define your own data decoding templates in XML
    In addition to automatically decoding standard/class specific USB requests/descriptors USBTrace also lets you define custom templates for decoding data buffer of requests in XML. Know more

  • Displays valuable information for device driver developers
    The IRP, URB and IO_STACK_LOCATION structures associated with each captured request is decoded and displayed by USBTrace. Also, in addition to capturing URBs, USBTrace captures Internal USB IOCTLs, User mode USB IOCTLs, PnP and Power IRPs. See Complete List of USB requests captured by USBTrace.

    USBTrace also allows device driver developers to capture USB requests made/received by any device object in the USB device stack.

  • Supports device class decoding / Write your own vendor specific class decoder
    USBTrace can decode class specific usb descriptors/requests and display detailed information regarding them. The classes currently supported are Hub, HID, Mass Storage, Bluetooth, Wireless USB HWA, Still Image Capture, Printer, Audio, Video, Smart Card, Vendor specific device class etc. Read more about USB device class decoding

  • Export Captured Data & Detailed Device Information
    Captured data can be exported as HTML, XML, Text or CSV reports. Detailed device information can also be exported. This feature will help you to document the device behavior as well as to share the captured data/device details in an easily readable form with others.

  • {For more details see USBTrace Features or Online Help Manual}

USBTrace USB Analyzer in Action

We recommend that you download the evaluation version or take the product tour to learn more about the features of our USB Analyzer.

Usb Mass Storage Reader Usb Devices Driver Download Softonic

Download USBTrace
Download and try the 15 days free evaluation version of USBTrace:
Download USBTrace
USBTrace Tour
Take the product tour to learn more about the features of USBTrace:
Take the Product Tour
Interactive Demo
View this interactive video demo to see how USBTrace works:
Launch the demo: Small : Large

Windows 10 Usb Mass Storage Driver

Subscribe to updates

You may either subscribe to our mailing list, follow us on twitter or read our blog for updates.

Windows
Read our BlogFollow us on Twitter